Brilliant Builders · Wear the future of construction

Why it matters

In construction, every second and every detail matters. The tools to measure them haven't kept up.

The helmet

A hard hat that sees every room.

Omni-directional cameras and an on-board AI engine turn a standard walkthrough into a complete record of what's been built.

A worker wearing the scanning helmet with cameras mounted on each side

On site

If you can walk it, it can capture it.

Stairwells, corridors, mechanical rooms and finished spaces, captured by the person already walking them.

Close-up of the helmet's side-mounted cameras — **Omni cameras**Left and right, for full coverage.

02

Eyes up, hands freeThe scan runs while you look around.

A worker in the helmet reaches toward a brick wall while it scans — **360° capture**Walls, ceilings and services in one pass.

A worker in the helmet captures pipes and conduit in a stairwell — **Stairwells and shafts**Tight spaces a tripod can't reach.

A worker walks a corridor wearing the helmet and holding a tablet — **Corridors**Scan as fast as you can walk.

A superintendent wearing the helmet reviews the report on a tablet — **Results on the tablet**Review the report before you leave.

A scan operator wearing the helmet looks over a finished room — **Room by room**Every room mapped and counted.

How it works

From RFP to verified room, without leaving the room.

The contract, broken down before the job starts.

The analyzer reads every section of the RFP and organizes it into scope, requirements, deliverables, risks and clarifications, so you see exactly what the RFP asks for.
Walk in. The room builds itself in 3D.

The helmet scans the room as you move and builds a 3D model from the point cloud. Object detection then marks doors, windows, cabinets and switches, each with a confidence score.
Every item checked against the contract.

What the scan found is cross-verified against what the RFP scope calls for. Matches are confirmed, gaps are flagged, and each flag carries the clause behind it.
The answer, in your hand, in the room.

The report lands on the tablet. Raise an RFI or approve the change on the spot, and the decision is logged.

01 / READ THE RFP

RFP #2025-42-BSAMPLE

Scope of WorkMandatory Requirements DeliverablesEvaluation Criteria Risks & ConstraintsClarifications Required Strategic Insights

Scope in RFP · Level 2	In RFP
Doors	12
Windows	8
Switches	14

Cross-verificationROOM 214

Item	RFP	Scan	Status
Doors	12	12	match
Windows	8	7	−1
Cabinets	6	6	match
Switches	14	16	+2
Outlets	22	22	match

Level 2 · Room 21414:24

3match

2flags

0critical

RFI-014 sent · window countMandatory Requirements §3.2

Approved · 2 extra switchesClarifications Required · Q7

Raise RFINext room

What you get

Time. Cost. Accuracy.

Time

Scan as fast as you can walk.

One walkthrough instead of days of manual checks. The site is scanned into a 3D model and compared with the RFP before you leave.

Accuracy

Every count checked against the contract.

What the RFP calls for, what the scan actually found, and how precisely the two are cross-verified.

Doors: 12 / 12
Windows: 7 / 8

Cost

Catch scope gaps before they turn into rework, change orders or overpayment.

Quantity takeoffs
Scope descriptions
Cost breakdowns

The assistant app

Your estimator, accountant and project engineer.

Estimates, proposals, invoices and payroll from your phone, by tapping or just by asking. Works with Amazon Alexa and Google Assistant.

"Hey Alexa, submit invoice."

"No problem. For how much?"

"For 80%."

"Done. It's out for signature and on its way to your contract manager."

Your construction assistant
One app for the business side of the job.
Estimation
Answer a few questions and get the estimate.
Invoices
G702/703 forms, built and sent for approval.
Payroll
Enter the week's hours, get the payroll PDF.
Proposals
Proposals and compliance forms by voice.

The outdated process

Every second and every detail matters. Brilliant Builders is fast, light and real-time.

A worker sets up a tripod-mounted scanner in an office corridor

Traditional tools

Stop. Set up. Scan. Repeat.

A tripod and a setup at every scan position
Data processed back at the office
Reports days later
Lost time between finding a problem and fixing it

Brilliant Builders

Just walk.

The helmet captures the site as you move
The AI engine processes it on the spot
Takeoffs and reports before you leave the room
Decisions made on site, while they still count

See it in action

Faster insights. Fewer errors. Smarter builds.

Who it's for

Built for everyone who signs off on the work.

A superintendent wearing the helmet checks the tablet in a stairwell

Less rework. Faster closeout.

Find scope gaps before drywall, not at punch list
Raise RFIs from the room with the scan attached
A logged record of what was installed settles disputes

Tech specs

For people who ask, How?

Capture: Omni-camera smart helmet; 360° visuals while walking
Edge compute: NVIDIA Jetson Nano; Mapping and detection on device
Mapping: SLAM, 3D point cloud; Built in real time
Detection: RetinaNet, ResNet-50 + FPN; 54 construction classes
Document analysis: Locally hosted LLM with RAG; Self-hosted, reads the full RFP
Connectivity: Offline first; Syncs when a network is available
Field device: Tablet app; Reports, RFIs, a 3D point-cloud model of the site, and approvals

Build Brilliant

Building clarity for the future.

See your own site, scanned and verified. Put one floor of a live job on the pilot program and see your own numbers.

Pilot program

FAQ

Questions contractors ask first.

How accurate are the counts?

Each detection carries a confidence score, and low-confidence items are marked for a quick human check instead of being counted silently. We can also measure accuracy against a manual count on your project.

Does it need internet on site?

No. Mapping and detection run on an NVIDIA Jetson Nano carried with the helmet. Reports sync when a connection is available.

How long does it take to train a field team?

If you can walk a room, you can scan it. Training is mostly about reading the report and using the RFI and approve actions, and we run it on site at the start of a project.

Who owns the scan data?

You do. Raw scans stay on your hardware by default, and you decide what gets synced or shared.

Book a demo

Let us work on it.

Tell us about a project. We'll run the analyzer on your RFP and show you a live scan in 20 minutes.

Phone(877) 837-8150
Emailinfo@brilliantbuilders.com
Office1101 W Lake St, Suite 602, Chicago, IL 60607

Wear the future of construction.

Why it matters

A hard hat that sees every room.

If you can walk it, it can capture it.

From RFP to verified room, without leaving the room.

The contract, broken down before the job starts.

Walk in. The room builds itself in 3D.

Every item checked against the contract.

The answer, in your hand, in the room.

Time. Cost. Accuracy.

Scan as fast as you can walk.

Every count checked against the contract.

Cost

Your estimator, accountant and project engineer.

Your construction assistant

Estimation

Invoices

Payroll

Proposals